Experienced carpet cleaning organizations use a number of carpet cleaning techniques to clean a home’s carpets. Each and every cleaning approach has its own unique advantages and disadvantages. But how do you decide on amongst them? Assessment these benefits and drawbacks before deciding which technique you would prefer to be applied to clean your carpet.

Fundamentally, carpet cleaning strategies could be placed in one of two categories: wet cleaning or dry cleaning. Wet cleaning consists of hot water extraction and may consist of cleaning with an absorbent pad. Dry carpet cleaning includes the use of chemical powders or foams applied by unique machines with counter rotating brushes, pads or cylinders.

1. Wet cleaning
How it operates

Also known as hot water extraction or steam cleaning, the carpet is initially pre-conditioned with a chemical reagent that liquefies soils and oil-based substances which might be present inside the carpet fibers. Water is heated to a temperature near its boiling point and pressurized, then injected in to the carpet. Following about ten to 15 minutes, the remedy is extracted with a vacuum.
Require professional support along with your project?
Get quotes from top-rated pros.


Gets out soiling from deep down within the carpet.

Enables the usage of higher temperatures, pressures and chemical concentrates.

Permits extended dwell times for reaction of cleaning solvents.

Chemical reactivity facilitated by agitation with grooming tool or extraction wand.

Most extensively applied system.

Encouraged by carpet suppliers and industry cleaning authorities and professionals


Comparatively extended drying time, but this could be reduced with the use of potent equipment by competent technicians.

Highly-priced gear generally expected for maximum efficiency.

Relatively high cost factors.

2. Cleaning with an absorbent pad
How it works

This carpet cleaning technique is also frequently identified as bonnet cleaning and is most usually applied for routine light upkeep. It could also be employed for frequent carpet cleaning. The carpet is initial vacuumed, and then a chemical answer is sprayed on to it having a hand pump or electric sprayer. The resolution is allowed to keep around the carpet for any appropriate dwell or reaction time.

The absorbent pad or bonnet, which looks like a towel, is placed on the drive block of a rotary floor machine and spun more than the carpet surface at 100 to 300 rpm. This action serves to impregnate the carpet fibers together with the chemical resolution and then choose it up together with the soils afterward.


Rapid, straightforward and economical.

Outstanding final results with lightly soiled carpets.


Only cleans the top rated one-third of carpet fibers, incapable of reaching deeper down.

Leaves dirt and chemical compounds to accumulate at the bottom in the carpet fibers.

3. Dry cleaning with an absorbent compound
How it works

A powder which has been mixed with particular solvents and cleaning agents is spread more than the carpet, and after that worked in to the carpet fibers using a machine fitted with counter-rotating brushes. The powder absorbs soils within the carpet fibers. Just after it’s permitted to set around the carpet for ten to 15 minutes, it’s vacuumed up.


Incredibly very simple system with no particular technical training expected.

Incredibly rapidly drying, it typically only requires about 20 minutes just before the carpet might be back in service.


Powder may possibly be trapped in plush pile carpets and left to create up more than time.

May cause excessive dust build-up inside the home.

Unable to clean deep down into the carpet.

4. Dry foam or rotary shampoo strategy
How it performs

A cleaning agent is applied for the carpet to assist suspend dirt and debris within the carpet, that is then whipped into foam and worked into the carpet fibers with the rotating brushes of a unique machine. Soon after a quick dwell time, the foam is extracted with a vacuum.


Speedy, straightforward to apply and economical.

Rotating brushes present exceptional agitation.

Little volume of moisture permits rapidly drying of carpet.


Unable to attain thorough soil extraction under the surface of your carpet.

Higher temperatures ordinarily not achieved.

Excessive wetting possible with gear malfunction.

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)